Nping
De Linuxmemo.
(Différences entre les versions)
Ligne 8 : | Ligne 8 : | ||
nping -c 1 --tcp -p 80,433 scanme.nmap.org google.com | nping -c 1 --tcp -p 80,433 scanme.nmap.org google.com | ||
+ | |||
+ | Nping 0.5.59BETA1 ( https://nmap.org/nping ) | ||
+ | Usage: nping [Probe mode] [Options] {target specification} | ||
+ | |||
+ | TARGET SPECIFICATION: | ||
+ | Targets may be specified as hostnames, IP addresses, networks, etc. | ||
+ | Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254 | ||
+ | PROBE MODES: | ||
+ | --tcp-connect : Unprivileged TCP connect probe mode. | ||
+ | --tcp : TCP probe mode. | ||
+ | --udp : UDP probe mode. | ||
+ | --icmp : ICMP probe mode. | ||
+ | --arp : ARP/RARP probe mode. | ||
+ | --tr, --traceroute : Traceroute mode (can only be used with | ||
+ | TCP/UDP/ICMP modes). | ||
+ | TCP CONNECT MODE: | ||
+ | -p, --dest-port <port spec> : Set destination port(s). | ||
+ | -g, --source-port <portnumber> : Try to use a custom source port. | ||
+ | TCP PROBE MODE: | ||
+ | -g, --source-port <portnumber> : Set source port. | ||
+ | -p, --dest-port <port spec> : Set destination port(s). | ||
+ | --seq <seqnumber> : Set sequence number. | ||
+ | --flags <flag list> : Set TCP flags (ACK,PSH,RST,SYN,FIN...) | ||
+ | --ack <acknumber> : Set ACK number. | ||
+ | --win <size> : Set window size. | ||
+ | --badsum : Use a random invalid checksum. | ||
+ | UDP PROBE MODE: | ||
+ | -g, --source-port <portnumber> : Set source port. | ||
+ | -p, --dest-port <port spec> : Set destination port(s). | ||
+ | --badsum : Use a random invalid checksum. | ||
+ | ICMP PROBE MODE: | ||
+ | --icmp-type <type> : ICMP type. | ||
+ | --icmp-code <code> : ICMP code. | ||
+ | --icmp-id <id> : Set identifier. | ||
+ | --icmp-seq <n> : Set sequence number. | ||
+ | --icmp-redirect-addr <addr> : Set redirect address. | ||
+ | --icmp-param-pointer <pnt> : Set parameter problem pointer. | ||
+ | --icmp-advert-lifetime <time> : Set router advertisement lifetime. | ||
+ | --icmp-advert-entry <IP,pref> : Add router advertisement entry. | ||
+ | --icmp-orig-time <timestamp> : Set originate timestamp. | ||
+ | --icmp-recv-time <timestamp> : Set receive timestamp. | ||
+ | --icmp-trans-time <timestamp> : Set transmit timestamp. | ||
+ | ARP/RARP PROBE MODE: | ||
+ | --arp-type <type> : Type: ARP, ARP-reply, RARP, RARP-reply. | ||
+ | --arp-sender-mac <mac> : Set sender MAC address. | ||
+ | --arp-sender-ip <addr> : Set sender IP address. | ||
+ | --arp-target-mac <mac> : Set target MAC address. | ||
+ | --arp-target-ip <addr> : Set target IP address. | ||
+ | IPv4 OPTIONS: | ||
+ | -S, --source-ip : Set source IP address. | ||
+ | --dest-ip <addr> : Set destination IP address (used as an | ||
+ | alternative to {target specification} ). | ||
+ | --tos <tos> : Set type of service field (8bits). | ||
+ | --id <id> : Set identification field (16 bits). | ||
+ | --df : Set Don't Fragment flag. | ||
+ | --mf : Set More Fragments flag. | ||
+ | --ttl <hops> : Set time to live [0-255]. | ||
+ | --badsum-ip : Use a random invalid checksum. | ||
+ | --ip-options <S|R [route]|L [route]|T|U ...> : Set IP options | ||
+ | --ip-options <hex string> : Set IP options | ||
+ | --mtu <size> : Set MTU. Packets get fragmented if MTU is | ||
+ | small enough. | ||
+ | IPv6 OPTIONS: | ||
+ | -6, --IPv6 : Use IP version 6. | ||
+ | --dest-ip : Set destination IP address (used as an | ||
+ | alternative to {target specification}). | ||
+ | --hop-limit : Set hop limit (same as IPv4 TTL). | ||
+ | --traffic-class <class> : : Set traffic class. | ||
+ | --flow <label> : Set flow label. | ||
+ | ETHERNET OPTIONS: | ||
+ | --dest-mac <mac> : Set destination mac address. (Disables | ||
+ | ARP resolution) | ||
+ | --source-mac <mac> : Set source MAC address. | ||
+ | --ether-type <type> : Set EtherType value. | ||
+ | PAYLOAD OPTIONS: | ||
+ | --data <hex string> : Include a custom payload. | ||
+ | --data-string <text> : Include a custom ASCII text. | ||
+ | --data-length <len> : Include len random bytes as payload. | ||
+ | ECHO CLIENT/SERVER: | ||
+ | --echo-client <passphrase> : Run Nping in client mode. | ||
+ | --echo-server <passphrase> : Run Nping in server mode. | ||
+ | --echo-port <port> : Use custom <port> to listen or connect. | ||
+ | --no-crypto : Disable encryption and authentication. | ||
+ | --once : Stop the server after one connection. | ||
+ | --safe-payloads : Erase application data in echoed packets. | ||
+ | TIMING AND PERFORMANCE: | ||
+ | Options which take <time> are in seconds, or append 'ms' (milliseconds), | ||
+ | 's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m, 0.25h). | ||
+ | --delay <time> : Adjust delay between probes. | ||
+ | --rate <rate> : Send num packets per second. | ||
+ | MISC: | ||
+ | -h, --help : Display help information. | ||
+ | -V, --version : Display current version number. | ||
+ | -c, --count <n> : Stop after <n> rounds. | ||
+ | -e, --interface <name> : Use supplied network interface. | ||
+ | -H, --hide-sent : Do not display sent packets. | ||
+ | -N, --no-capture : Do not try to capture replies. | ||
+ | --privileged : Assume user is fully privileged. | ||
+ | --unprivileged : Assume user lacks raw socket privileges. | ||
+ | --send-eth : Send packets at the raw ethernet layer. | ||
+ | --send-ip : Send packets using raw IP sockets. | ||
+ | --bpf-filter <filter spec> : Specify custom BPF filter. | ||
+ | OUTPUT: | ||
+ | -v : Increment verbosity level by one. | ||
+ | -v[level] : Set verbosity level. E.g: -v4 | ||
+ | -d : Increment debugging level by one. | ||
+ | -d[level] : Set debugging level. E.g: -d3 | ||
+ | -q : Decrease verbosity level by one. | ||
+ | -q[N] : Decrease verbosity level N times | ||
+ | --quiet : Set verbosity and debug level to minimum. | ||
+ | --debug : Set verbosity and debug to the max level. | ||
+ | EXAMPLES: | ||
+ | nping scanme.nmap.org | ||
+ | nping --tcp -p 80 --flags rst --ttl 2 192.168.1.1 | ||
+ | nping --icmp --icmp-type time --delay 500ms 192.168.254.254 | ||
+ | nping --echo-server "public" -e wlan0 -vvv | ||
+ | nping --echo-client "public" echo.nmap.org --tcp -p1-1024 --flags ack | ||
+ | |||
+ | SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES |
Version du 15 juillet 2020 à 14:58
Nping is an open source tool for network packet generation, response analysis and response time measurement.
nping [ <Options> ] { <targets> }
nping -c 1 --tcp -p 80,433 scanme.nmap.org google.com
Nping 0.5.59BETA1 ( https://nmap.org/nping ) Usage: nping [Probe mode] [Options] {target specification}
TARGET SPECIFICATION:
Targets may be specified as hostnames, IP addresses, networks, etc. Ex: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254
PROBE MODES:
--tcp-connect : Unprivileged TCP connect probe mode. --tcp : TCP probe mode. --udp : UDP probe mode. --icmp : ICMP probe mode. --arp : ARP/RARP probe mode. --tr, --traceroute : Traceroute mode (can only be used with TCP/UDP/ICMP modes).
TCP CONNECT MODE:
-p, --dest-port <port spec> : Set destination port(s). -g, --source-port <portnumber> : Try to use a custom source port.
TCP PROBE MODE:
-g, --source-port <portnumber> : Set source port. -p, --dest-port <port spec> : Set destination port(s). --seq <seqnumber> : Set sequence number. --flags <flag list> : Set TCP flags (ACK,PSH,RST,SYN,FIN...) --ack <acknumber> : Set ACK number. --win <size> : Set window size. --badsum : Use a random invalid checksum.
UDP PROBE MODE:
-g, --source-port <portnumber> : Set source port. -p, --dest-port <port spec> : Set destination port(s). --badsum : Use a random invalid checksum.
ICMP PROBE MODE:
--icmp-type <type> : ICMP type.
--icmp-code : ICMP code.
--icmp-id <id> : Set identifier.
--icmp-seq <n> : Set sequence number.
--icmp-redirect-addr <addr> : Set redirect address.
--icmp-param-pointer <pnt> : Set parameter problem pointer.
--icmp-advert-lifetime <time> : Set router advertisement lifetime.
--icmp-advert-entry <IP,pref> : Add router advertisement entry.
--icmp-orig-time <timestamp> : Set originate timestamp.
--icmp-recv-time <timestamp> : Set receive timestamp.
--icmp-trans-time <timestamp> : Set transmit timestamp.
ARP/RARP PROBE MODE:
--arp-type <type> : Type: ARP, ARP-reply, RARP, RARP-reply. --arp-sender-mac <mac> : Set sender MAC address. --arp-sender-ip <addr> : Set sender IP address. --arp-target-mac <mac> : Set target MAC address. --arp-target-ip <addr> : Set target IP address.
IPv4 OPTIONS:
-S, --source-ip : Set source IP address. --dest-ip <addr> : Set destination IP address (used as an alternative to {target specification} ). --tos <tos> : Set type of service field (8bits). --id <id> : Set identification field (16 bits). --df : Set Don't Fragment flag. --mf : Set More Fragments flag. --ttl <hops> : Set time to live [0-255]. --badsum-ip : Use a random invalid checksum. --ip-options: Set IP options --ip-options <hex string> : Set IP options --mtu <size> : Set MTU. Packets get fragmented if MTU is small enough.
IPv6 OPTIONS:
-6, --IPv6 : Use IP version 6. --dest-ip : Set destination IP address (used as an alternative to {target specification}). --hop-limit : Set hop limit (same as IPv4 TTL). --traffic-class <class> : : Set traffic class. --flow <label> : Set flow label.
ETHERNET OPTIONS:
--dest-mac <mac> : Set destination mac address. (Disables ARP resolution) --source-mac <mac> : Set source MAC address. --ether-type <type> : Set EtherType value.
PAYLOAD OPTIONS:
--data <hex string> : Include a custom payload. --data-string <text> : Include a custom ASCII text. --data-length <len> : Include len random bytes as payload.
ECHO CLIENT/SERVER:
--echo-client <passphrase> : Run Nping in client mode. --echo-server <passphrase> : Run Nping in server mode. --echo-port <port> : Use custom <port> to listen or connect. --no-crypto : Disable encryption and authentication. --once : Stop the server after one connection. --safe-payloads : Erase application data in echoed packets.
TIMING AND PERFORMANCE:
Options which take <time> are in seconds, or append 'ms' (milliseconds), 's' (seconds), 'm' (minutes), or 'h' (hours) to the value (e.g. 30m, 0.25h). --delay <time> : Adjust delay between probes. --rate <rate> : Send num packets per second.
MISC:
-h, --help : Display help information. -V, --version : Display current version number. -c, --count <n> : Stop after <n> rounds. -e, --interface <name> : Use supplied network interface. -H, --hide-sent : Do not display sent packets. -N, --no-capture : Do not try to capture replies. --privileged : Assume user is fully privileged. --unprivileged : Assume user lacks raw socket privileges. --send-eth : Send packets at the raw ethernet layer. --send-ip : Send packets using raw IP sockets. --bpf-filter <filter spec> : Specify custom BPF filter.
OUTPUT:
-v : Increment verbosity level by one. -v[level] : Set verbosity level. E.g: -v4 -d : Increment debugging level by one. -d[level] : Set debugging level. E.g: -d3 -q : Decrease verbosity level by one. -q[N] : Decrease verbosity level N times --quiet : Set verbosity and debug level to minimum. --debug : Set verbosity and debug to the max level.
EXAMPLES:
nping scanme.nmap.org nping --tcp -p 80 --flags rst --ttl 2 192.168.1.1 nping --icmp --icmp-type time --delay 500ms 192.168.254.254 nping --echo-server "public" -e wlan0 -vvv nping --echo-client "public" echo.nmap.org --tcp -p1-1024 --flags ack
SEE THE MAN PAGE FOR MANY MORE OPTIONS, DESCRIPTIONS, AND EXAMPLES